3/26/2012

Intex Small Top Cover O-Ring Model 10325 Review

Intex Small Top Cover O-Ring Model 10325
Average Reviews:

(More customer reviews)
NOT A TOY ITS A REPLACEMENT RING...WAY OVERPRICED...COULDN'T FIND ONE THROUGH INTEX FOR 2.95...THEY WERE OUT...SO I GOT RAKED OVER THE COALS!! THATS WHAT HAPPENS WHEN YOU NEED SOMETHING! PEOPLE ARE GREEDY!

Click Here to see more reviews about: Intex Small Top Cover O-Ring Model 10325

Replacement rubber O-Ring gasket seal for Intex filter pump top covers. O-ring fits Intex 56637 (Krystal Klear Model 637), Intex 58631 (Krystal Klear Model 12 and 12R), Intex 56635 (Krystal Klear Model 635), and Intex 58603 (Krystal Klear Model 02 and 603)

Buy Now

Click here for more information about Intex Small Top Cover O-Ring Model 10325

Read More...

3/25/2012

Jet 708737 DC-CS 2-Micron Canister Filter for 708640 DC-650A Dust Collector Review

Jet 708737 DC-CS 2-Micron Canister Filter for 708640 DC-650A Dust Collector
Average Reviews:

(More customer reviews)
I had been looking to upgrade my dust collection system with a higher efficiency cartridge (2 micron) for quite some time. I have been putting it off because my Jet Dust Collector is an older model. It is a DC-610 and I could never find an upgrade kit that indicated that it would support my DC-610. I saw this filter on Amazon and started digging into the specifications. Cross referencing it with the dust collection specifications from various Jet web sites, what I found was that my older Jet DC-610 matched the dimensions (14") and horse power (1hp) of the newer DC-650. The newer Jet DC-610 dimensions were smaller than the unit I had. I called product support for the canister filter and they concurred that it should fit. I decided to order it. When it arrived I removed the upper bag and installed the filter on my older dust collector. The filter fit perfectly. The canister filter came with a foam rubber seal already installed in order to assure an air-tight fit. I did need to add some support to the filter side of the dust collector. I then replaced the bottom bag wiht a clear plastic one. I was happy that I finally had finally upgraded to a 2 micron canister filter on my system. I then turned it on. I could not believe the difference in the increased airflow at each dust collection station. I was expecting some difference but not to the degree that I experienced. The March 2008 issue of Wood Magazine has a great article on dust collectors and the efficiencies gained by installing a 2 micron cartridge filter. I am completely satisfied with this purchase and the quality and performance of this filter. It was worth every penny. I just wish I had figured this out sooner.

Click Here to see more reviews about: Jet 708737 DC-CS 2-Micron Canister Filter for 708640 DC-650A Dust Collector

With the Dust Dog canister, the Jet DC-CS 2-Micron Canister Filter catches dust 15 times smaller than conventional filters. While standard cloth bags only filter down to 30 microns, Dust Dog's wily V-weave filter design captures particles as small as 2 microns for unsurpassed air filtration, optimal lung health, and cleaner work environment. The Dust Dog filter reduces air resistance to provide a 10- to 20-percent more CFM than conventional dust collectors. Transparent, disposable bags make it easy to tell when a bag is full for faster, easier bag changes and more economical dust collection. This canister filter is designed for the 708640 DC-650A dust collector.

Buy Now

Click here for more information about Jet 708737 DC-CS 2-Micron Canister Filter for 708640 DC-650A Dust Collector

Read More...

RPS #E2R-6 2PK Emerson Wick Filter Review

RPS #E2R-6 2PK Emerson Wick Filter
Average Reviews:

(More customer reviews)
saved my humidifier for another year, bought humidifier at home depot, they never carried the filters, found a supply at lowes, bought all they had...then i found the filters at amazon, they will keep humidifier running...thanks...

Click Here to see more reviews about: RPS #E2R-6 2PK Emerson Wick Filter

2 Pack, Extended Life Wick Filter, Fits Emerson HD500, 6200, 7002 HDC-2R, HD1211, 2412, HDC-411 Needs 4 Wicks, Kenmore 14407, 14451, 1442, 14909,14413 Needs 4 Wicks 14912.

Buy NowGet 26% OFF

Click here for more information about RPS #E2R-6 2PK Emerson Wick Filter

Read More...

Honeywell TH8110U1003 Vision Pro 8000 Digital Thermostat Review

Honeywell TH8110U1003 Vision Pro 8000 Digital Thermostat
Average Reviews:

(More customer reviews)
First, if you know anything about installing thermostats, it's no harder than any other. In other words, there are 4-7 colored wires, and you have to put them in the right place. That's it.
Now, for the thermostat, it is just beyond good. From the easy programming to the flexibility of the options, to the FULL AUTO mode so you never have to worry about switching from heat to cool again, it's a set and forget job. And the options for temp and holiday hold, the circulation feature that keeps your whole house more constant, etc. Great.
Remember, this is a single stage model, but there are slightly more expensive versions for multi-stage setups, so choose the right one. Most people will be fine with the 8110. Even if you live in an apartment or a rental, buy this, install it, save money, be more comfortable, then put the old one back before you move out. it's worth it.

Click Here to see more reviews about: Honeywell TH8110U1003 Vision Pro 8000 Digital Thermostat

Electronic Programmable ThermostatsType: Digital Touchscreen ProgrammableStyle: 1 Heat, 1 CoolMaximum Temperature (°F): 90.000Minimum Temperature (°F): 40.000

Buy NowGet 40% OFF

Click here for more information about Honeywell TH8110U1003 Vision Pro 8000 Digital Thermostat

Read More...

3/24/2012

Shop-Vac 2850010 2.0-Peak HP Two-Stage Back Pack Vacuum Review

Shop-Vac 2850010 2.0-Peak HP Two-Stage Back Pack Vacuum
Average Reviews:

(More customer reviews)
I have a couple shop vacs in the shop and garage so I'm familiar with their quality. I got this one to walk around the house and clean out the corners; along the side of the fridge; around the fireplace etc. Works great. Picks up little wood chunks around the fireplace just like a shop-vac should - not like an upright which requires major surgery when it breaths in such things. Not as noisy as an upright hoover. The fifty foot cord is more than enough and you really can walk around the house comfortably with the thing on your back. It uses throw-away bags and so far, I haven't been able to find a source (including the shop-vac web site). Assume those will be available soon.

Click Here to see more reviews about: Shop-Vac 2850010 2.0-Peak HP Two-Stage Back Pack Vacuum

The Shop-Vac 1-3/4-gallon 2 HP backpack vacuum tackles large areas with minimum effort. This lightweight vacuum enables its user to clean the toughest hard-to-reach spots. A convenient tool belt, top carrying handle, and ergonomic aluminum wands ensure easy use. It features an industrial 2 HP two-stage motor, a 7-quart filter bag, a 5-foot locking hose, lightweight aluminum locking wands, a utility nozzle, a dual-surface selector nozzle for both bare floors and carpeting, a crevice tool, and a round dusting brush. A 50-foot extra-long extension is standard. It comes with a 1-year warranty.

Buy NowGet 40% OFF

Click here for more information about Shop-Vac 2850010 2.0-Peak HP Two-Stage Back Pack Vacuum

Read More...

Lux Products TX9000TS Touch Screen 7 Day Programmable Thermostat Review

Lux Products TX9000TS Touch Screen 7 Day Programmable Thermostat
Average Reviews:

(More customer reviews)
BOTTOM LINE:
Took about 45 minutes from removing old unit to new installation and completing programming. It works great!SYSTEM:
4 wire Gas heating and electric cooling.OLD UNIT:
Honeywell Electronic C9825 - bought in year 2000. Has weekday, weekend, 4 periods per day and adaptive recovery. Replaced as temperature override and 'Hold' features work erratically.TOTAL EXPERIENCE:
1 WeekREVIEW:
The TX9000TS is the 3rd electronic thermostat I've owned and is probably the most intuitive of them all. Lux has provided a generous sized display and a very responsive touch-screen. The back light is a pleasing blue. The unit is 3 parts - the main unit, a back plate where you connect the wires and an optional accent plate that provides a .75 inch border to provide a finished look.
I had read the earlier reviews on Amazon and had decided that I will not read the instructions prior to the install to determine how intuitive this system really was? The only exception I would allow myself was if the wiring was significantly different from my old unit - which it was not!
The setup was relatively simple. Removed the old unit and replaced it with the new back plate and accent bezel. No new holes to drill. The accent bezel is the closest piece to the wall and is held up by the back plate. I straightened the old wires, inserted into the corresponding clamp and tightened the screws - Total time of 15 minutes.
I inserted 2 new alkaline batteries (And NO, I did not use the recommended Duracell or Energizer!) and the unit came to life. I clicked on the time and it started beeping. I could see arrows on the right and intuitively touched them to set the time. Did the same to set the day. Touching the 'Menu' got me into the programming mode for the unit. I touched "SCROLL" to skip to the next feature, and "NEXT" for the next step in the feature programming. I do admit I took a few iterations to get used to the programming logic. Also 'YES' to accept settings is a little different from the colloquial "ENTER" we are used to in a computer literate world!
This unit is programmable for every day of the week. I, at most, need one setting for all week-days and one each for Sat and Sun. While programming the days, I noticed that they had a "COPY" function. I was sure that this was to copy my settings - every time I touched it, it went over to the next day. I thought that the data was being copied over and I did verify it after I completed my first iteration of programming. By the way, once you are in the programming mode, setting the start time for any period and/or setting the temperature is as simple as touching the time or temperature and using the up/down arrows. Could not be simpler!
I was fortunate that I had the program settings available from my old unit - once I went through a few iterations of errors (not using "YES" to accept settings!) the unit was programmed - Total time of 15 minutes
I spent another 10 minutes setting the 'Filter Usage' and 'Swing settings' and reviewing the 'Temperature Calibration' and 'Energy Usage' monitor. The Swing settings only went upto 2.5 degrees in 0.5 degree increments (One of the other reviewer found that it went upto 3.0 degrees???)
I did not see the 'Smart Recovery' option and thought that it might be a switch on the circuit board like my last unit. It was 1.30 in the morning and I did not feel like reading the instructions. I attached the TX9000TS and it kicked off instantly.
The instructions did have the following options that can be changed with the small slide switches towards the back of the main unit -- 12/24 hours time format, Smart Recovery, Degrees in C or F, and 2 or 5 minute interval between restarts.OTHER REVIEWER'S CONCERNS
Some of the other reviewers have concerns that the unit does not automatically switch between heating and cooling to keep the temperature constant. This is done intentionally!
In the summer, our ideal temperature is 74 degrees. When we leave for work, our "DAY" period is set to 82 degrees so that the AC does not cool the home while we're out. In an auto switch between heating and cooling, the heat would take over and get the temperature to 82 degrees and maintain it - which is NOT the intent!! We do not want the AC to cool any below 82. I can, of course, see the gentleman's point if one spends 90% of their time at home and is OK with the associated heating/cooling cost.PROS:
* TX9000TS is rated #1 by Consumer Reports
* Cheapest in its class for display size and features
* Very easy to program
* Love the LARGE display and the accuracy of the touch zones.
* Very nice Backlight and fantastic positioning of the backlight switch.
* Like the "CHANGE FILTER" feature. I used to use a Sharpie on the filter and then try to read the date through the grill
* Like the "Low Battery" alert.
* Power Usage also seems like a valuable feature...will find out in the near future! I did manage to find it by pressing menu and scrollingCONS:
* Lux could have done a better job with the programming terminology and could have improved the user experience with regards to the programming. For e.g., if you had to program day and time, it continues to loop when you click "NEXT"...to exit the programming you need to use "MENU".
* Another feature I miss from my old Honeywell is the "RUN PROGRAM" button which when pressed would clear the "OVERRIDE" functions and run as per the program. The TX9000TS unit achieves this either by touching the temperature and using the arrow keys to bring the temperature to the programmed value, OR, by touching "HOLD" twice. Minor inconvenience.
* The tabs, on the top of the base plate, that hold this unit are very small and I am in constant fear of breaking them off. My old Honeywell had a very robust design.CONCLUSION:
I do agree that the TX9000TS is not completely intuitive, but it is nowhere as unintuitive as others claim. I do like to play around with stuff that I get...if it were all super-intuitive and easy then it'd be no fun! ;o)

Click Here to see more reviews about: Lux Products TX9000TS Touch Screen 7 Day Programmable Thermostat

Efficient. Easy. Economical. That's why you'll love the Lux Products TX9000TS Seven-Day Programmable Thermostat. This clever device gives you complete and accurate temperature control at the touch of a finger. And compatible with a variety of heating and cooling systems, this thermostat incorporates do-it-yourself installation, a responsive touch screen, and a large lighted display for straightforward programming and operation.
Customize Your Home's Heating and Cooling ScheduleWith the TX9000TS it's easy to set a daily heating and cooling schedule for your home, which can ensure your comfort and potentially reduce your utility costs. With easy-to-use menu-driven programming and intuitive touch-screen commands, this thermostat allows you to program up to four different time and temperature settings in a 24-hour period (morning, day, evening, and night).

You also have the option of setting a different program for every day of the week.

Environmentally Friendly, Wallet-Friendly ChoiceThe TX9000TS can be an energy-efficient, environmentally friendly choice that can save your family approximately 33% on energy bills.

It comes pre-programmed with a default energy conserving heating and cooling schedule that's designed to save up to $180 in energy costs over one year.

And thanks to the keyboard lockout feature, the TX9000TS is great for households with small children or other potential unauthorized users.

User-Friendly Features and Operating SimplicityIncredibly user-friendly, the TX9000TS boasts a range of helpful features to simplify both programming and everyday operation. First, a large blue electroluminescent display is easy to read--even in low light--and clearly shows the current day, time, temperature, and filter status.

Additionally, audible touch confirmation indicates that your choices are being registered, while snowflake and flame icons indicate cooling or heating mode. For further convenience, a filter-usage monitor allows you to set filter limits from zero to 720 hours of use, and a 'replace' icon will appear when battery power is running low.

What's in the BoxTX9000TS programmable thermostat, mounting hardware, and manual.




Buy NowGet 14% OFF

Click here for more information about Lux Products TX9000TS Touch Screen 7 Day Programmable Thermostat

Read More...

Ryobi 153066R Bump Knob Assembly Review

Ryobi 153066R Bump Knob Assembly
Average Reviews:

(More customer reviews)
This was the perfect replacement for my weed-eater bump head. I couldn't find one at the local hardware stores and my weed-eater was worthless without this part. Now I don't need to buy a new weed eater.

Click Here to see more reviews about: Ryobi 153066R Bump Knob Assembly

Fits most Lawn-Boy & Ryobi trimmers. Models 130R, 135R electric trimmers. 700R, 710R, 720R, 740R, 750R, 760R, 765R, 766R, 770R, 920R, CS720R and SS720R.Also fits Troy Bilt models TB75SS and TB475SS.Also fits Yard Machine models Y28 and 2800M.Poly bagged.

Buy NowGet 60% OFF

Click here for more information about Ryobi 153066R Bump Knob Assembly

Read More...