Showing posts with label n95. Show all posts
Showing posts with label n95. Show all posts

4/27/2012

Gerson N95 Particulate respirator ( 20 per Box) Review

Gerson N95 Particulate respirator ( 20 per Box)
Average Reviews:

(More customer reviews)
This model of respirator is listed on the CDC website as follows "FDA has authorized emergency use of these respirators by the general public1 during the current swine flu emergency to help reduce exposure to airborne germs." A table follows that statement with the gerson 1730 model in the table.
I purchased a couple of boxes because the cost was not too bad at around $8/box, and I can use them in the garage when woodworking, spraying some chemicals, cutting tile, etc. So I won't be wasting my money even if we don't get the flu. If one of my kids gets the flu, I will probably quarantine them to their room with a TV and game boy, and wear these when I am directly caring for them, along with a pair of gloves. In the hospital when entering or exiting a patient's room who had an airborne illness like the flu, we gowned, gloved and put on masks to protect ourselves. This respirator isn't guaranteed to keep you from getting the flu, but may help you be safe. Safer still is good hand washing frequently, and washing counters, doorknobs, and surfaces with bleach spray, etc.
If I were a pregnant woman, elderly person, or person with an underlying condition such as asthma, bronchitis, cancer, HIV etc. I would probably wear a respirator and perhaps even gloves in public. The mortality and complication rates among these populations from the flu is so much higher that more precautionary measures for this population is prudent. The FDA has approved the 3M 8612 model respirator, which is probably the one I would go with if I were in this population group and could afford to do so. If the cost of those is prohibitive, the Gerson 1730 would also be an option.

Click Here to see more reviews about: Gerson N95 Particulate respirator ( 20 per Box)

The Gerson 1730 is a high quality economical respirator. Designed to help provide comfortable, reliable worker protection against certain non-oil based particles. Its lightweight construction promotes greater worker acceptance and comfort and increased wear time.CDC AND WHO recommends N95 or better for airborne diseases. Meets NIOSH 42CFR84 standard.

Buy NowGet 60% OFF

Click here for more information about Gerson N95 Particulate respirator ( 20 per Box)

Read More...

2/04/2012

MSA Safety Works 10087609 N95 Respirator with Exhalation Valve Review

MSA Safety Works 10087609 N95 Respirator with Exhalation Valve
Average Reviews:

(More customer reviews)
I use this respirator when cleaning out the litter box. Don't know why they call it dust-free litter. It's still dusty! This mask is comfortable, the fit is good and the valve makes it especially easy to breathe in.
DIFFERENCES BETWEEN FACEMASKS AND RESPIRATORS
The respirators differ from facemasks because they fit closely around the face and have a finer filter. They are more difficult to breathe in, which is why the valve helps.
Medical facemasks are made to prevent penetration of blood and bodily fluids and large airborne droplets, but they don't do anything to filter out viruses. N95 respirators can filter out virus containing particles that are too small to be filtered by standard medical facemasks. The CDC recommends the N95 respirator for those healthcare workers exposed to patients with contagious respiratory illnesses.

Click Here to see more reviews about: MSA Safety Works 10087609 N95 Respirator with Exhalation Valve

The addition of an exhalation valve to this already effective mask (sanding, saw dust, fiberglass, drywall dust) adds comfort and gives a better seal because breathing doesnt lift the edges off the face.The foam sealing surface gives a comfortable fit, and the package reseals for storage.

Buy NowGet 28% OFF

Click here for more information about MSA Safety Works 10087609 N95 Respirator with Exhalation Valve

Read More...

12/29/2011

North CFR-1 Dust Mask with 21 Filters Review

North CFR-1 Dust Mask with 21 Filters
Average Reviews:

(More customer reviews)
The product is well made, but the rubber across the nose tends to be too tight and causes discomfort. Other than that I like them. The head straps are heavy duty and comfortable.

Click Here to see more reviews about: North CFR-1 Dust Mask with 21 Filters

This new offering nicely fills the gap between flimsy disposable dust masks and more serious respiratory protection. Replaceable filters (NIOSH rating N95) offer excellent dust protection. The low-profile mask body is made of very soft rubber, and is held in place with a double elastic strap. An exhalation valve vents the warm, moist air you exhale downward helping the filter medium last longer and leaving safety glasses unfogged.

Buy Now

Click here for more information about North CFR-1 Dust Mask with 21 Filters

Read More...

12/12/2011

3M R9211-10 N95 Cool-Flow Particulate Sanding Respirator, 10-Pack Review

3M R9211-10 N95 Cool-Flow Particulate Sanding Respirator, 10-Pack
Average Reviews:

(More customer reviews)
These particulate respirators work very well, blocking out nuisance dust such as sawdust. I use them both at home and on the job. They are rated N95 for particulates and do a very good job filtering out the vast majority of dust and particles. This is a style slightly different from the molded ones you may be used to seeing at most big box stores.
The mask comes in individual plastic bags and are folded flat. I like that they are individually packaged, as I have had problems both at jobsites and at my workshop keeping fresh masks from being contaminated with dust when they are all nested together in one bag. Not a problem when each mask has its own wrapper. Also, you know when you take it out that it hasn't been used by someone else and then put back.
These also have the comfort valve, as you see in the picture. A light, flexible flap opens when you exhale, but immediately shuts when you inhale. It is protected by a surprisingly sturdy plastic cage, emblazoned with the 3M logo. This valve makes a huge difference, especially in hot climates. It makes a huge difference in both heat and moisture retention; making the mask markedly more comfortable vastly increases the likelihood that it will be worn when needed by you, your employees, or whomever. This is a critical feature, in my opinion, and worth the extra dough over those without it. In colder climes, or when one only needs to use the mask for short periods, you might be able to do without the vent and save a few bucks.
One very nice thing about this mask over the pre-molded versions is that the chin portion opens up to actually cover my entire chin by snugging up under it. For me, this gives a better fit than the molded ones that just seem to sit on top of my chin. I've got to give the comfort edge to these. Like the molded version, these masks also have a thin metal strip that you can mold to the bridge of your nose. On the inside of this strip is a broad and soft strip of foam, sufficiently thick (about 1/8 inch) to conform to the contours of your nose when using the metal clamp.
My only complaint about these otherwise excellent respirators revolves around the straps. I think they could be more robust. While they are strong enough not to break, I find they stretch out too easily and lose elasticity, especially if you find yourself taking the mask on and off, or reusing it over time. It is true that these are extremely comfortable to wear - indeed they are the most comfortable I've found - I would prefer if they held the mask just a little tighter to my face. The straps themselves are held to the mask by staples, an arrangement I also don't prefer, but I've never had one snap or slip loose from this point.
These are more expensive than the pre-molded versions, but I the additional comfort and individual packaging makes it worth it to me. There are other brands that are also N95-rated, but I trust my lungs to these, which have never failed me. I do want to mention one cautionary note about any filter: They do clog eventually. When insulating my attic with blow-in insulation, my respirator got so clogged I could barely breathe through it. While they did their job and no dust got through, a clogged filter can be dangerous so check your filters/respirators often if you are in extreme conditions.
The issue over the straps is a minor one for me, really, and doesn't keep me from going back to these masks over others. They are well made and very comfortable. They are excellent for dusty environments around the home, and also for appropriate work settings. I also include these particular ones in my emergency kits for home, auto, and work. Recommended!

Click Here to see more reviews about: 3M R9211-10 N95 Cool-Flow Particulate Sanding Respirator, 10-Pack

Three-panel respirator with innovative design is ideally suited for work settings that involve heat, humidity or long periods of wear. Suggested applications include grinding, sanding, sweeping, bagging, and other operations that create dust. Meets NIOSH 42 CFR 84 N95 requirements.

Buy NowGet 30% OFF

Click here for more information about 3M R9211-10 N95 Cool-Flow Particulate Sanding Respirator, 10-Pack

Read More...

11/19/2011

3M 8511 Particulate Sanding Respirator N95 with Valve, 10-Pack Review

3M 8511 Particulate Sanding Respirator N95 with Valve, 10-Pack
Average Reviews:

(More customer reviews)
This respirator is better because of the one-way ventilation valve in the front, which keeps your exhalations from coming out and fogging up your glasses. Also, the elastic is much more durable than the really cheap masks.

Click Here to see more reviews about: 3M 8511 Particulate Sanding Respirator N95 with Valve, 10-Pack

Uniquely designed to help provide comfortable, reliable worker protection. Ideally suited for work settings that involve heat, humidity or long periods of wear. Workplace applications include grinding, sanding, sweeping, bagging and other dusty/hot operations. Features the 3M Cool Flow Exhalation Valve and adjustable M-noseclip to help provide a custom fit and secure seal.

Buy NowGet 21% OFF

Click here for more information about 3M 8511 Particulate Sanding Respirator N95 with Valve, 10-Pack

Read More...

7/31/2011

3M 8000 Particle Respirator N95, 30-Pack Review

3M 8000 Particle Respirator N95, 30-Pack
Average Reviews:

(More customer reviews)
Aside from recent challenges expressed by others in obtaining N95 respirators, I ordered a 30 pack from Deerso at $13.98/box and received them promptly. I should hope that anyone reading these reviews realizes that the bulk of the negative feedback is not product related, but just people caught up in the swine flu hysteria.
As stated, this is a good mask for a great price. Anyone familiar with the various types of respirators on the market will realize that a N95 is a far better mask than those marketed as "dust masks" you find at the hardware store. Those sell for $2-$5 for a two pack, these provide better protection and at $13-$15 for a box of 30, is a much better bargain.
The mask is perfect for anyone with alergies and/or asthma, which pretty much describes me. They are firm to the touch, as opposed to the soft cloth green surgical N95's (which cost more), and have dual elastic straps that hold tight throughout a long day. They are perfect for the garden, cleaning around the house & yard, changing the cat litter, doing anything with flour, and especially dusting & vacuming. Compared to softer masks, this mask actually breathes better and I don't sweat under it as much.
Like all masks, the metal nose clip is very helpful and, perhaps this is just my imagination, seems to hold better. Meaning it doesn't give way as easily as other brands I have tried, where you have to keep pinching it every so often to close the gap over your nose. This is a big issue to anyone like myself who wears glasses and they keep fogging up if your mask doesn't fit well.
As for my two cents on whether or not this is a good "flu mask," N95 means the mask will prevent 95% of particles from getting through. The only way to be really, really sure is to get a N100 mask and have it be a full fask mask as germs can just as easily get into you via your eyes and ears. Is anyone seriously going to wear one of those all the time?
For me, a N95 mask is better than a regular mask and falls into the category of "good enough" (for me).
Overall, this was a great buy.


Click Here to see more reviews about: 3M 8000 Particle Respirator N95, 30-Pack

3M™ Particulate Respirator 8000 is 3M recommended for sanding and working with fiberglass insulation and drywall sanding. 3M™ Cool Flow™ Exhalation Valve allows easy exhalation and heat reduction, which provides cool, dry comfort.NIOSH approval: N95.

Buy NowGet 25% OFF

Click here for more information about 3M 8000 Particle Respirator N95, 30-Pack

Read More...